Kwcdn Scraper
Spider read kwcdn.com in 4.3 s without a browser and returned 97 lines of clean markdown, including sections like "Page 1", "Page 8" and "Page 9".
# Page 8IMPORTANT ASSEMBLY INFORMATION Before beginning assembly, carefully read all instructions. For help identifying small parts, see the EXPLODED VIEW and PARTS LIST. As you assemble your product, make sure all parts are ori -ented as shown in the drawings. Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.It is strongly recommended that this equipment is assembled by two or more people to avoid possible injury. Securely tighten all Nuts and Bolts after all components have been assembled onto the bench. Do not tighten each bolt right after it is installed.All required M8x16 Bolts of this product have been prein -stalled. Do not over tighten any component with pivoting function. Make sure the pivoting component is able to move freely. Make sure the M10 Knob is inserted completely through the upright beam and turned to a locked position when adding weights on it. 6# Page 9ASSEMBLY Step1:18. M10x45 Bolt *2 19. 10x30 Washer * 2 20. M10 Locknut * 28. Foam Roller10. Leg Developer Support4. Front Base8201918410 7# Page 11Step3:We have labeled the Upright Beam. The Upright Beam in the pic -ture above is the left side.NOTE: 1218192071312. Rear Base13. Rear Diagonal Support7. Upright Beam18. M10x45 Bolt*4*219. 10x30 Washer*4*2 20. M10 Locknut*4*2>1.Parts required on the Rear Bases 9# Page 122122725231312>2.Parts required to attach the Rear Diagonal Support to the Upright Beam:NOTE: The Rear Diagonal Support comes with two M8 Locknuts installed. You only need to assemble two more M8 Locknuts provided. The assembly steps on the right and left are the same.12. Rear Base13. Rear Diagonal Support7. Upright Beam21. M8x65 Bolt*2*222. 8x22 Washer*2*2 23. M8 Locknut*225. M10 Knob*2 10# Page 13We have labeled the Adjustable Cross Bar. Please assemble it in the directions indicated.NOTE: 1620211Step4:16. M10x65 Bolt*420. M10 Locknut * 42. Cross Brace11. Adjustable Cross Bar 11# Page 14The same call, in code.
The capture above came back as markdown. These examples add a key, so you get browser rendering, proxies, and concurrency on kwcdn.com.
import { SpiderBrowser } from "spider-browser";
const spider = new SpiderBrowser({
apiKey: process.env.SPIDER_API_KEY!,
});
await spider.connect();
const page = spider.page!;
await page.goto("https://kwcdn.com");
// No selectors, no schema. Spider reads the page and names the fields.
const data = await page.scrape();
console.log(data);
await spider.close();import { Spider } from "@spider-cloud/spider-client";
const spider = new Spider({ apiKey: process.env.SPIDER_API_KEY! });
const result = await spider.scrapeUrl("https://www.kwcdn.com", {
return_format: "markdown",
});
console.log(result);Ready for volume? Get an API key →
Fields you can pull.
Spider names these from the page. The capture above came back as markdown; the same
call with return_format: "json" returns them as keys.
What kwcdn.com costs to scrape.
The capture above cost $0.000572 to fetch. Pricing is $1 per GB of pre-transformation bandwidth plus $0.001 per CPU minute, so a page like this one lands at a fraction of a cent. Failed requests are billed at $0.
- Free balance on signup
- No card required to test
- Balance never expires
Run it keyless, no account
More Directories scrapers.
Spotify Main Page Scraper
Extract structured data from Spotify Main Page with automated CSS selectors.
Roblox Landing Page Scraper
Roblox landing page metadata and cookie banner information.
Mozilla Homepage Data Scraper
A scraper for extracting all useful data from the Mozilla homepage, including site metadata, navigation, and content.
Start scraping kwcdn.com.
You already have the call. A key raises the rate limit and turns on browser rendering, proxies, and concurrency. Balance never expires, and top-ups go through secure checkout.